The StatusService class accesses the Pokit Status service of Pokit devices. More...

Inheritance diagram for StatusService:

Collaboration diagram for StatusService:

Classes
struct	CharacteristicUuids
	Characteristics available via the `Pokit Status` service. More...

struct	DeviceCharacteristics
	Attributes included in the `Device Characteristics` characterstic. More...

struct	ServiceUuids
	UUIDs of the `Pokit Status` service. More...

struct	Status
	Attributes included in the `Status` characterstic. More...

Public Types
enum class	DeviceStatus : quint8 { Idle = 0 , MultimeterDcVoltage = 1 , MultimeterAcVoltage = 2 , MultimeterDcCurrent = 3 , MultimeterAcCurrent = 4 , MultimeterResistance = 5 , MultimeterDiode = 6 , MultimeterContinuity = 7 , MultimeterTemperature = 8 , DsoModeSampling = 9 , LoggerModeSampling = 10 }
	Values supported by the `Status` attribute of the `Status` characteristic. More...

enum class	BatteryStatus : quint8 { Low = 0 , Good = 1 }
	Values supported by the `Battery Status` attribute of the `Status` characteristic. More...

enum class	SwitchPosition : quint8 { Voltage = 0 , MultiMode = 1 , HighCurrent = 2 }
	Values supported by the (undocumented) `Switch Position` attribute of the `Status` characteristic. More...

enum class	ChargingStatus : quint8 { Discharging = 0 , Charging = 1 , Charged = 2 }
	Values supported by the (undocumented) `Charging Statue` attribute of the `Status` characteristic. More...

enum class	TorchStatus : quint8 { Off = 0 , On = 1 }
	Values supported by the single byte of the attribute of the (undocumented) `Torch` characteristic. More...

enum class	ButtonStatus : quint8 { Released = 0 , Pressed = 1 , Held = 2 }
	Values supported by the second byte of the attribute of the (undocumented) `Button Press` characteristic. More...

Signals
void	deviceCharacteristicsRead (const StatusService::DeviceCharacteristics &characteristics)
	This signal is emitted when the `Device Characteristics` characteristic has been read successfully.

void	deviceNameRead (const QString &deviceName)
	This signal is emitted when the `Device Name` characteristic has been read successfully.

void	deviceNameWritten ()
	This signal is emitted when the `Device Name` characteristic has been written successfully.

void	deviceStatusRead (const StatusService::Status &status)
	This signal is emitted when the `Status` characteristic has been read successfully.

void	deviceLedFlashed ()
	This signal is emitted when device's LED has flashed in response to a write of the `Flash LED` characteristic.

void	torchStatusRead (const TorchStatus &status)
	This signal is emitted when the `Torch` characteristic has been read successfully.

void	torchStatusWritten ()
	This signal is emitted when the `Torch` characteristic has been written successfully.

void	buttonPressRead (const quint8 &unknown, const ButtonStatus status)
	This signal is emitted when the `Button Press` characteristic has been read successfully.

Signals inherited from AbstractPokitService
void	serviceDetailsDiscovered ()
	This signal is emitted when the Pokit service details have been discovered.

void	serviceErrorOccurred (QLowEnergyService::ServiceError newError)
	This signal is emitted whenever an error occurs on the underlying QLowEnergyService.

Public Member Functions
	StatusService (QLowEnergyController const pokitDevice, QObject parent=nullptr)
	Constructs a new Pokit service with parent.

	~StatusService () override
	Destroys this StatusService object.

bool	readCharacteristics () override
	Read all characteristics.

bool	readDeviceCharacteristics ()
	Read the `Status` service's `Device Characteristics` characteristic.

bool	readStatusCharacteristic ()
	Read the `Status` service's `Status` characteristic.

bool	readNameCharacteristic ()
	Read the `Status` service's `Name` characteristic.

bool	readTorchCharacteristic ()
	Read the `Status` service's (undocumented) `Torch` characteristic.

bool	readButtonPressCharacteristic ()
	Read the `Status` service's (undocumented) `Button Press` characteristic.

DeviceCharacteristics	deviceCharacteristics () const
	Returns the most recent value of the `Status` service's `Device Characteristics` characteristic.

Status	status () const
	Returns the most recent value of the `Status` service's `Status` characteristic.

bool	enableStatusNotifications ()
	Enables client-side notifications of device status changes.

bool	disableStatusNotifications ()
	Disables client-side notifications of device status changes.

QString	deviceName () const
	Returns the most recent value of the `Status` services's `Device Name` characteristic.

bool	setDeviceName (const QString &name)
	Set's the Pokit device's name to name.

bool	flashLed ()
	Flash the Pokit device's LED.

std::optional< TorchStatus >	torchStatus () const
	Returns the most recent value of the `Status` services's `Torch` characteristic.

bool	setTorchStatus (const TorchStatus status)
	Set the Pokit device's torch to status.

bool	enableTorchStatusNotifications ()
	Enables client-side notifications of torch status changes.

bool	disableTorchStatusNotifications ()
	Disables client-side notifications of torch status changes.

std::optional< ButtonStatus >	buttonPress () const
	Returns the most recent value of the `Status` services's `Button Press` characteristic.

bool	enableButtonPressedNotifications ()
	Enables client-side notifications of button presses.

bool	disableButtonPressedNotifications ()
	Disables client-side notifications of button presses.

Public Member Functions inherited from AbstractPokitService
virtual	~AbstractPokitService ()
	Destroys this AbstractPokitService object.

bool	autoDiscover () const
	Returns `true` if autodiscovery of services and service details is enabled, `false` otherwise.

void	setAutoDiscover (const bool discover=true)
	If discover is `true`, autodiscovery will be attempted.

std::optional< PokitProduct >	pokitProduct () const
	Returns the Pokit product this service is attached to.

void	setPokitProduct (const PokitProduct product)
	Sets the current Pokit product.

QLowEnergyService *	service ()
	Returns a non-const pointer to the internal service object, if any.

const QLowEnergyService *	service () const
	Returns a const pointer to the internal service object, if any.

Public Member Functions inherited from QObject
virtual const QMetaObject *	metaObject () const const

	QObject (QObject *parent)

virtual bool	event (QEvent *e)

virtual bool	eventFilter (QObject watched, QEvent event)

QString	objectName () const const

void	setObjectName (const QString &name)

bool	isWidgetType () const const

bool	isWindowType () const const

bool	signalsBlocked () const const

bool	blockSignals (bool block)

QThread *	thread () const const

void	moveToThread (QThread *targetThread)

int	startTimer (int interval, Qt::TimerType timerType)

int	startTimer (std::chrono::milliseconds time, Qt::TimerType timerType)

void	killTimer (int id)

T	findChild (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QRegExp &regExp, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const

const QObjectList &	children () const const

void	setParent (QObject *parent)

void	installEventFilter (QObject *filterObj)

void	removeEventFilter (QObject *obj)

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *method, Qt::ConnectionType type) const const

bool	disconnect (const char signal, const QObject receiver, const char *method) const const

bool	disconnect (const QObject receiver, const char method) const const

void	dumpObjectTree ()

void	dumpObjectInfo ()

void	dumpObjectTree () const const

void	dumpObjectInfo () const const

bool	setProperty (const char *name, const QVariant &value)

QVariant	property (const char *name) const const

QList< QByteArray >	dynamicPropertyNames () const const

void	destroyed (QObject *obj)

void	objectNameChanged (const QString &objectName)

QObject *	parent () const const

bool	inherits (const char *className) const const

void	deleteLater ()

	Q_DISABLE_COPY (Class)

	Q_DISABLE_MOVE (Class)

	Q_DISABLE_COPY_MOVE (Class)

T	qobject_cast (QObject *object)

T	qobject_cast (const QObject *object)

T	qFindChild (const QObject *obj, const QString &name)

QList< T >	qFindChildren (const QObject *obj, const QString &name)

QList< T >	qFindChildren (const QObject *obj, const QRegExp &regExp)

	Q_CLASSINFO (Name, Value)

	Q_INTERFACES (...)

	Q_PROPERTY (...)

	Q_ENUMS (...)

	Q_FLAGS (...)

	Q_ENUM (...)

	Q_FLAG (...)

	Q_ENUM_NS (...)

	Q_FLAG_NS (...)

	Q_OBJECT Q_OBJECT

	Q_GADGET Q_GADGET

	Q_NAMESPACE Q_NAMESPACE

	Q_NAMESPACE_EXPORT (EXPORT_MACRO)

	Q_SIGNALS Q_SIGNALS

	Q_SIGNAL Q_SIGNAL

	Q_SLOTS Q_SLOTS

	Q_SLOT Q_SLOT

	Q_EMIT Q_EMIT

	Q_INVOKABLE Q_INVOKABLE

	Q_REVISION Q_REVISION

	Q_SET_OBJECT_NAME (Object)

	QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT

Static Public Member Functions
static QString	toString (const StatusService::DeviceStatus &status)
	Returns a string version of the status enum label.

static QString	toString (const StatusService::BatteryStatus &status)
	Returns a string version of the status enum label.

static QString	toString (const StatusService::SwitchPosition &position)
	Returns a string version of the position enum label.

static QString	toString (const StatusService::ChargingStatus &status)
	Returns a string version of the status enum label.

static QString	toString (const StatusService::TorchStatus &status)
	Returns a string version of the status enum label.

static QString	toString (const StatusService::ButtonStatus &status)
	Returns a string version of the status enum label.

Static Public Member Functions inherited from QObject
QString	tr (const char sourceText, const char disambiguation, int n)

QString	trUtf8 (const char sourceText, const char disambiguation, int n)

QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject context, Functor functor, Qt::ConnectionType type)

bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char method)

bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method)

bool	disconnect (const QMetaObject::Connection &connection)

bool	disconnect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method)

Friends
class	TestStatusService

Additional Inherited Members
Public Attributes inherited from QObject
typedef	QObjectList

Protected Member Functions inherited from QObject
QObject *	sender () const const

int	senderSignalIndex () const const

int	receivers (const char *signal) const const

bool	isSignalConnected (const QMetaMethod &signal) const const

virtual void	timerEvent (QTimerEvent *event)

virtual void	childEvent (QChildEvent *event)

virtual void	customEvent (QEvent *event)

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

Properties inherited from QObject
	objectName

Detailed Description

The StatusService class accesses the Pokit Status service of Pokit devices.

Member Enumeration Documentation

◆ BatteryStatus

enum class StatusService::BatteryStatus : quint8

strong

Values supported by the Battery Status attribute of the Status characteristic.

Enumerator
Low	Low (replace battery).
Good	Good.

◆ ButtonStatus

enum class StatusService::ButtonStatus : quint8

strong

Values supported by the second byte of the attribute of the (undocumented) Button Press characteristic.

Enumerator
Released	Button was released.
Pressed	Button was pressed.
Held	Button was held down (for typically 1,500ms).

◆ ChargingStatus

enum class StatusService::ChargingStatus : quint8

strong

Values supported by the (undocumented) Charging Statue attribute of the Status characteristic.

Enumerator
Discharging	Battery is dischargin.
Charging	Battery is being charged.
Charged	Battery is fully charged.

◆ DeviceStatus

enum class StatusService::DeviceStatus : quint8

strong

Values supported by the Status attribute of the Status characteristic.

Enumerator
Idle	Device is idle.
MultimeterDcVoltage	Multimeter is measuring DC voltage.
MultimeterAcVoltage	Multimeter is measuring AC voltage.
MultimeterDcCurrent	Multimeter is measuring DC current.
MultimeterAcCurrent	Multimeter is measuring AC current.
MultimeterResistance	Multimeter is measuring resistance.
MultimeterDiode	Multimeter is measuring diode.
MultimeterContinuity	Multimeter is measuring continuity.
MultimeterTemperature	Multimeter is measuring temperature.
DsoModeSampling	DSO is sampling.
LoggerModeSampling	Data Logger is sampling.

◆ SwitchPosition

enum class StatusService::SwitchPosition : quint8

strong

Values supported by the (undocumented) Switch Position attribute of the Status characteristic.

Enumerator
Voltage	Device is switched to Voltage position.
MultiMode	Device is switched to Resistance / Low Current / Capacitance / Diode position.
HighCurrent	Device is switched to High Current position.

◆ TorchStatus

enum class StatusService::TorchStatus : quint8

strong

Values supported by the single byte of the attribute of the (undocumented) Torch characteristic.

Enumerator
Off	Torch is off.
On	Torch is on.

Member Function Documentation

◆ buttonPress()

std::optional< StatusService::ButtonStatus > StatusService::buttonPress ( ) const

Returns the most recent value of the Status services's Button Press characteristic.

The returned value, if any, is from the underlying Bluetooth stack's cache. If no such value is currently available (eg if the device does not support the Torch characteristic), then nullopt is returned.

Here is the call graph for this function:

◆ buttonPressRead

StatusService::buttonPressRead	(	const quint8 &	unknown,
		const ButtonStatus	status )

signal

This signal is emitted when the Button Press characteristic has been read successfully.

See also: readButtonPressCharacteristic

◆ deviceCharacteristics()

StatusService::DeviceCharacteristics StatusService::deviceCharacteristics ( ) const

Returns the most recent value of the Status service's Device Characteristics characteristic.

The returned value, if any, is from the underlying Bluetooth stack's cache. If no such value is currently available (ie the serviceDetailsDiscovered signal has not been emitted yet), then a null result is returned, which can be checked via the returned DeviceCharacteristics::firmwareVersion, like:

const DeviceCharacteristics characteristics = service->deviceCharacteristics();
if (!characteristics.firmwareVersion.isNull()) {
    ...
}

Here is the call graph for this function:

◆ deviceCharacteristicsRead

StatusService::deviceCharacteristicsRead ( const StatusService::DeviceCharacteristics & characteristics )

signal

This signal is emitted when the Device Characteristics characteristic has been read successfully.

See also: readDeviceCharacteristics

◆ deviceName()

QString StatusService::deviceName ( ) const

Returns the most recent value of the Status services's Device Name characteristic.

The returned value, if any, is from the underlying Bluetooth stack's cache. If no such value is currently available (ie the serviceDetailsDiscovered signal has not been emitted yet), then a null QString is returned.

Here is the call graph for this function:

◆ deviceNameRead

StatusService::deviceNameRead ( const QString & deviceName )

signal

This signal is emitted when the Device Name characteristic has been read successfully.

See also: readDeviceName

◆ deviceNameWritten

StatusService::deviceNameWritten ( )

signal

This signal is emitted when the Device Name characteristic has been written successfully.

See also: setDeviceName

◆ deviceStatusRead

StatusService::deviceStatusRead ( const StatusService::Status & status )

signal

This signal is emitted when the Status characteristic has been read successfully.

See also: readDeviceStatus

◆ disableButtonPressedNotifications()

bool StatusService::disableButtonPressedNotifications ( )

Disables client-side notifications of button presses.

Instantaneous button press statussed can still be fetched by readButtonPressCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

◆ disableStatusNotifications()

bool StatusService::disableStatusNotifications ( )

Disables client-side notifications of device status changes.

Instantaneous status can still be fetched by readStatusCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

◆ disableTorchStatusNotifications()

bool StatusService::disableTorchStatusNotifications ( )

Disables client-side notifications of torch status changes.

Instantaneous torch status can still be fetched by readTorchCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

◆ enableButtonPressedNotifications()

bool StatusService::enableButtonPressedNotifications ( )

Enables client-side notifications of button presses.

This is an alternative to manually requesting individual reads via readButtonPressCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

Successfully read values (if any) will be emitted via the torchStatusRead() signal.

◆ enableStatusNotifications()

bool StatusService::enableStatusNotifications ( )

Enables client-side notifications of device status changes.

This is an alternative to manually requesting individual reads via readStatusCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

Successfully read values (if any) will be emitted via the deviceStatusRead() signal.

◆ enableTorchStatusNotifications()

bool StatusService::enableTorchStatusNotifications ( )

Enables client-side notifications of torch status changes.

This is an alternative to manually requesting individual reads via readTorchCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

Successfully read values (if any) will be emitted via the torchStatusRead() signal.

◆ flashLed()

bool StatusService::flashLed ( )

Flash the Pokit device's LED.

Returns true if the flash request was successfully queued, false otherwise.

Emits deviceLedFlashed() if/when the LED has flashed successfully.

Note: This operation is only supported by Pokit Meter devices. Pokit Pro devices will report an Bluetooth ATT error 0x80.

Here is the call graph for this function:

◆ readButtonPressCharacteristic()

bool StatusService::readButtonPressCharacteristic ( )

Read the Status service's (undocumented) Button Press characteristic.

Returns true is the read request is succesfully queued, false otherwise (ie if the underlying controller it not yet connected to the Pokit device, or the device's services have not yet been discovered).

Emits buttonPressRead() if/when the characteristic has been read successfully.

Here is the caller graph for this function:

◆ readCharacteristics()

bool StatusService::readCharacteristics ( )

overridevirtual

Read all characteristics.

This convenience function will queue refresh requests of all characteristics supported by this service.

Relevant *Service::*Read signals will be emitted by derived class objects as each characteristic is successfully read.

Implements AbstractPokitService.

Here is the call graph for this function:

◆ readDeviceCharacteristics()

bool StatusService::readDeviceCharacteristics ( )

Read the Status service's Device Characteristics characteristic.

Returns true is the read request is succesfully queued, false otherwise (ie if the underlying controller it not yet connected to the Pokit device, or the device's services have not yet been discovered).

Emits deviceCharacteristicsRead() if/when the characteristic has been read successfully.

Here is the caller graph for this function:

◆ readNameCharacteristic()

bool StatusService::readNameCharacteristic ( )

Read the Status service's Name characteristic.

Returns true is the read request is succesfully queued, false otherwise (ie if the underlying controller it not yet connected to the Pokit device, or the device's services have not yet been discovered).

Emits deviceNameRead() if/when the characteristic has been read successfully.

Here is the caller graph for this function:

◆ readStatusCharacteristic()

bool StatusService::readStatusCharacteristic ( )

Read the Status service's Status characteristic.

Returns true is the read request is succesfully queued, false otherwise (ie if the underlying controller it not yet connected to the Pokit device, or the device's services have not yet been discovered).

Emits deviceStatusRead() if/when the characteristic has been read successfully.

Here is the caller graph for this function:

◆ readTorchCharacteristic()

bool StatusService::readTorchCharacteristic ( )

Read the Status service's (undocumented) Torch characteristic.

Returns true is the read request is succesfully queued, false otherwise (ie if the underlying controller it not yet connected to the Pokit device, or the device's services have not yet been discovered).

Emits torchStatusRead() if/when the characteristic has been read successfully.

Here is the caller graph for this function:

◆ setDeviceName()

bool StatusService::setDeviceName ( const QString & name )

Set's the Pokit device's name to name.

Returns true if the write request was successfully queued, false otherwise.

Emits deviceNameWritten() if/when the name has been set.

Here is the call graph for this function:

◆ setTorchStatus()

bool StatusService::setTorchStatus ( const TorchStatus status )

Set the Pokit device's torch to status.

Returns true if the request was successfully queued, false otherwise.

Emits torchStatusWritten() if/when the LED has flashed successfully.

Note: This operation is only supported by Pokit Pro devices, and not Pokit Meter devices.

Here is the call graph for this function:

◆ status()

StatusService::Status StatusService::status ( ) const

Returns the most recent value of the Status service's Status characteristic.

The returned value, if any, is from the underlying Bluetooth stack's cache. If no such value is currently available (ie the serviceDetailsDiscovered signal has not been emitted yet), then the returned StatusService::Status::batteryLevel member will be a quiet NaN, which can be checked like:

const StatusService::Status status = statusService->status();
if (qIsNaN(status.batteryVoltage)) {
    // Handle failure.
}

Not all Pokit devices support the Status::batteryStatus member, in which case the member will be initilialised to the maximum value supported by the underlying type (ie 255) to indicate "not set"

Here is the call graph for this function:

Here is the caller graph for this function:

◆ torchStatus()

std::optional< StatusService::TorchStatus > StatusService::torchStatus ( ) const

Returns the most recent value of the Status services's Torch characteristic.

The returned value, if any, is from the underlying Bluetooth stack's cache. If no such value is currently available (eg if the device does not support the Torch characteristic), then nullopt is returned.

Here is the call graph for this function:

◆ torchStatusRead

StatusService::torchStatusRead ( const TorchStatus & status )

signal

This signal is emitted when the Torch characteristic has been read successfully.

See also: setTorchStatus

◆ torchStatusWritten

StatusService::torchStatusWritten ( )

signal

This signal is emitted when the Torch characteristic has been written successfully.

See also: readTorchCharacteristic

The documentation for this class was generated from the following files:

Classes

Public Types

Signals

Public Member Functions

Static Public Member Functions

Friends

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ BatteryStatus

◆ ButtonStatus

◆ ChargingStatus

◆ DeviceStatus

◆ SwitchPosition

◆ TorchStatus

Member Function Documentation

◆ buttonPress()

◆ buttonPressRead

◆ deviceCharacteristics()

◆ deviceCharacteristicsRead

◆ deviceName()

◆ deviceNameRead

◆ deviceNameWritten

◆ deviceStatusRead

◆ disableButtonPressedNotifications()

◆ disableStatusNotifications()

◆ disableTorchStatusNotifications()

◆ enableButtonPressedNotifications()

◆ enableStatusNotifications()

◆ enableTorchStatusNotifications()

◆ flashLed()

◆ readButtonPressCharacteristic()

◆ readCharacteristics()

◆ readDeviceCharacteristics()

◆ readNameCharacteristic()

◆ readStatusCharacteristic()

◆ readTorchCharacteristic()

◆ setDeviceName()

◆ setTorchStatus()

◆ status()

◆ torchStatus()

◆ torchStatusRead

◆ torchStatusWritten