The MultimeterService class accesses the Multimeter service of Pokit devices. More...

Inheritance diagram for MultimeterService:

Collaboration diagram for MultimeterService:

Classes
struct	CharacteristicUuids
	Characteristics available via the `Multimeter` service. More...

union	Range
	Values supported by the `Range` attribute of the `Settings` characteristic. More...

struct	Reading
	Attributes included in the `Reading` characterstic. More...

struct	Settings
	Attributes included in the `Settings` characterstic. More...

Public Types
enum class	Mode : quint8 { Idle = 0 , DcVoltage = 1 , AcVoltage = 2 , DcCurrent = 3 , AcCurrent = 4 , Resistance = 5 , Diode = 6 , Continuity = 7 , Temperature = 8 }
	Values supported by the `Mode` attribute of the `Settings` and `Reading` characteristics. More...

enum class	VoltageRange : quint8 { _0_to_300mV = 0 , _300mV_to_2V = 1 , _2V_to_6V = 2 , _6V_to_12V = 3 , _12V_to_30V = 4 , _30V_to_60V = 5 , AutoRange = 255 }
	Values supported by the `Range` attribute of the `Settings` and `Reading` characteristics, when `Mode` is AC or DC voltage. More...

enum class	CurrentRange : quint8 { _0_to_10mA = 0 , _10mA_to_30mA = 1 , _30mA_to_150mA = 2 , _150mA_to_300mA = 3 , _300mA_to_3A = 4 , AutoRange = 255 }
	Values supported by the `Range` attribute of the `Settings` and `Reading` characteristics, when `Mode` is AC or DC current. More...

enum class	ResistanceRange : quint8 { _0_to_160 = 0 , _160_to_330 = 1 , _330_to_890 = 2 , _890_to_1K5 = 3 , _1K5_to_10K = 4 , _10K_to_100K = 5 , _100K_to_470K = 6 , _470K_to_1M = 7 , AutoRange = 255 }
	Values supported by the `Range` attribute of the `Settings` and `Reading` characteristics, when `Mode` is resistance. More...

enum class	MeterStatus : quint8 { AutoRangeOff = 0 , AutoRangeOn = 1 , NoContinuity = 0 , Continuity = 1 , Ok = 0 , Error = 255 }
	Values supported by the `Status` attribute of the `Settings` characteristic. More...

Signals
void	settingsWritten ()
	This signal is emitted when the `Settings` characteristic has been written successfully.

void	readingRead (const MultimeterService::Reading &reading)
	This signal is emitted when the `Reading` characteristic has been read successfully.

Signals inherited from AbstractPokitService
void	serviceDetailsDiscovered ()
	This signal is emitted when the Pokit service details have been discovered.

void	serviceErrorOccurred (QLowEnergyService::ServiceError newError)
	This signal is emitted whenever an error occurs on the underlying QLowEnergyService.

Public Member Functions
	MultimeterService (QLowEnergyController const pokitDevice, QObject parent=nullptr)
	Constructs a new Pokit service with parent.

	~MultimeterService () override
	Destroys this MultimeterService object.

bool	readCharacteristics () override
	Read all characteristics.

bool	readReadingCharacteristic ()
	Read the `Multimeter` service's `Reading` characteristic.

bool	setSettings (const Settings &settings)
	Configures the Pokit device's multimeter mode.

Reading	reading () const
	Returns the most recent value of the `Multimeter` service's `Reading` characteristic.

bool	enableReadingNotifications ()
	Enables client-side notifications of meter readings.

bool	disableReadingNotifications ()
	Disables client-side notifications of meter readings.

Public Member Functions inherited from AbstractPokitService
virtual	~AbstractPokitService ()
	Destroys this AbstractPokitService object.

virtual bool	readCharacteristics ()=0
	Read all characteristics.

bool	autoDiscover () const
	Returns `true` if autodiscovery of services and service details is enabled, `false` otherwise.

void	setAutoDiscover (const bool discover=true)
	If discover is `true`, autodiscovery will be attempted.

QLowEnergyService *	service ()
	Returns a non-const pointer to the internal service object, if any.

const QLowEnergyService *	service () const
	Returns a const pointer to the internal service object, if any.

Public Member Functions inherited from QObject
virtual const QMetaObject *	metaObject () const const

	QObject (QObject *parent)

virtual bool	event (QEvent *e)

virtual bool	eventFilter (QObject watched, QEvent event)

QString	objectName () const const

void	setObjectName (const QString &name)

bool	isWidgetType () const const

bool	isWindowType () const const

bool	signalsBlocked () const const

bool	blockSignals (bool block)

QThread *	thread () const const

void	moveToThread (QThread *targetThread)

int	startTimer (int interval, Qt::TimerType timerType)

int	startTimer (std::chrono::milliseconds time, Qt::TimerType timerType)

void	killTimer (int id)

T	findChild (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QRegExp &regExp, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const

const QObjectList &	children () const const

void	setParent (QObject *parent)

void	installEventFilter (QObject *filterObj)

void	removeEventFilter (QObject *obj)

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *method, Qt::ConnectionType type) const const

bool	disconnect (const char signal, const QObject receiver, const char *method) const const

bool	disconnect (const QObject receiver, const char method) const const

void	dumpObjectTree ()

void	dumpObjectInfo ()

void	dumpObjectTree () const const

void	dumpObjectInfo () const const

bool	setProperty (const char *name, const QVariant &value)

QVariant	property (const char *name) const const

QList< QByteArray >	dynamicPropertyNames () const const

void	destroyed (QObject *obj)

void	objectNameChanged (const QString &objectName)

QObject *	parent () const const

bool	inherits (const char *className) const const

void	deleteLater ()

	Q_DISABLE_COPY (Class)

	Q_DISABLE_MOVE (Class)

	Q_DISABLE_COPY_MOVE (Class)

T	qobject_cast (QObject *object)

T	qobject_cast (const QObject *object)

T	qFindChild (const QObject *obj, const QString &name)

QList< T >	qFindChildren (const QObject *obj, const QString &name)

QList< T >	qFindChildren (const QObject *obj, const QRegExp &regExp)

	Q_CLASSINFO (Name, Value)

	Q_INTERFACES (...)

	Q_PROPERTY (...)

	Q_ENUMS (...)

	Q_FLAGS (...)

	Q_ENUM (...)

	Q_FLAG (...)

	Q_ENUM_NS (...)

	Q_FLAG_NS (...)

	Q_OBJECT Q_OBJECT

	Q_GADGET Q_GADGET

	Q_NAMESPACE Q_NAMESPACE

	Q_NAMESPACE_EXPORT (EXPORT_MACRO)

	Q_SIGNALS Q_SIGNALS

	Q_SIGNAL Q_SIGNAL

	Q_SLOTS Q_SLOTS

	Q_SLOT Q_SLOT

	Q_EMIT Q_EMIT

	Q_INVOKABLE Q_INVOKABLE

	Q_REVISION Q_REVISION

	Q_SET_OBJECT_NAME (Object)

	QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT

Static Public Member Functions
static QString	toString (const Mode &mode)
	Returns mode as a user-friendly string.

static QString	toString (const VoltageRange &range)
	Returns range as a user-friendly string.

static QVariant	minValue (const VoltageRange &range)
	Returns the minimum value for range in (integer) millivolts, or the string "Auto".

static QVariant	maxValue (const VoltageRange &range)
	Returns the maximum value for range in (integer) millivolts, or the string "Auto".

static QString	toString (const CurrentRange &range)
	Returns range as a user-friendly string.

static QVariant	minValue (const CurrentRange &range)
	Returns the minimum value for range in (integer) milliamps, or the string "Auto".

static QVariant	maxValue (const CurrentRange &range)
	Returns the maximum value for range in (integer) milliamps, or the string "Auto".

static QString	toString (const ResistanceRange &range)
	Returns range as a user-friendly string.

static QVariant	minValue (const ResistanceRange &range)
	Returns the minimum value for range in (integer) ohms, or the string "Auto".

static QVariant	maxValue (const ResistanceRange &range)
	Returns the maximum value for range in (integer) ohms, or the string "Auto".

static QString	toString (const Range &range, const Mode &mode)
	Returns range as a user-friendly string, or a null QString if mode has no ranges.

Static Public Member Functions inherited from QObject
QString	tr (const char sourceText, const char disambiguation, int n)

QString	trUtf8 (const char sourceText, const char disambiguation, int n)

QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject context, Functor functor, Qt::ConnectionType type)

bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char method)

bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method)

bool	disconnect (const QMetaObject::Connection &connection)

bool	disconnect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method)

Static Public Attributes
static const QBluetoothUuid	serviceUuid
	UUID of the "Multimeter" service.

Friends
class	TestMultimeterService

Additional Inherited Members
Public Attributes inherited from QObject
typedef	QObjectList

Protected Member Functions inherited from QObject
QObject *	sender () const const

int	senderSignalIndex () const const

int	receivers (const char *signal) const const

bool	isSignalConnected (const QMetaMethod &signal) const const

virtual void	timerEvent (QTimerEvent *event)

virtual void	childEvent (QChildEvent *event)

virtual void	customEvent (QEvent *event)

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

Properties inherited from QObject
	objectName

Detailed Description

The MultimeterService class accesses the Multimeter service of Pokit devices.

Member Enumeration Documentation

◆ CurrentRange

enum class MultimeterService::CurrentRange : quint8

strong

Values supported by the Range attribute of the Settings and Reading characteristics, when Mode is AC or DC current.

Enumerator
_0_to_10mA	0 to 10mA.
_10mA_to_30mA	10mA to 30mA.
_30mA_to_150mA	30mA to 150mA.
_150mA_to_300mA	150mA to 300mA.
_300mA_to_3A	300mA to 3A.
AutoRange	Auto-range. Todo: Pokit Pro supports up to 10A.

◆ MeterStatus

enum class MultimeterService::MeterStatus : quint8

strong

Values supported by the Status attribute of the Settings characteristic.

Enumerator
AutoRangeOff	Auto-range is disabled (voltage, current and resistance modes only).
AutoRangeOn	Auto-range is enabled (voltage, current and resistance modes only).
NoContinuity	No continuity (continuity mode only).
Continuity	Continuity (continuity mode only).
Ok	Ok (temperature and diode modes only).
Error	Error (all modes).

◆ Mode

enum class MultimeterService::Mode : quint8

strong

Values supported by the Mode attribute of the Settings and Reading characteristics.

Enumerator
Idle	Make device idle.
DcVoltage	Measure DC voltage.
AcVoltage	Measure AC voltage.
DcCurrent	Measure DC current.
AcCurrent	Measure AC current.
Resistance	Measure resistance.
Diode	Measure diode.
Continuity	Measure continuity.
Temperature	Measure temperature.

◆ ResistanceRange

enum class MultimeterService::ResistanceRange : quint8

strong

Values supported by the Range attribute of the Settings and Reading characteristics, when Mode is resistance.

Enumerator
_0_to_160	0 to 160 ohms.
_160_to_330	160 to 330 ohms.
_330_to_890	330 to 890 ohms.
_890_to_1K5	890 to 1.5K ohms.
_1K5_to_10K	1.5K to 10K ohms.
_10K_to_100K	10K to 100K ohms.
_100K_to_470K	100K to 470K ohms.
_470K_to_1M	470K to 1M ohms.
AutoRange	Auto-range. Todo: Pokit Pro supports up to 3M ohms.

◆ VoltageRange

enum class MultimeterService::VoltageRange : quint8

strong

Values supported by the Range attribute of the Settings and Reading characteristics, when Mode is AC or DC voltage.

Enumerator
_0_to_300mV	0 to 300mV.
_300mV_to_2V	300mV to 2V.
_2V_to_6V	2V to 6V.
_6V_to_12V	6V to 12V.
_12V_to_30V	12V to 30V.
_30V_to_60V	30V to 60V.
AutoRange	Auto-range. Todo: Pokit Pro supports up to 600V.

Member Function Documentation

◆ disableReadingNotifications()

bool MultimeterService::disableReadingNotifications ( )

Disables client-side notifications of meter readings.

Instantaneous reads can still be fetched by readReadingCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

◆ enableReadingNotifications()

bool MultimeterService::enableReadingNotifications ( )

Enables client-side notifications of meter readings.

This is an alternative to manually requesting individual reads via readReadingCharacteristic().

Returns true is the request was successfully submited to the device queue, false otherwise.

Successfully read values (if any) will be emitted via the readingRead() signal.

◆ maxValue() [1/3]

QVariant MultimeterService::maxValue ( const CurrentRange & range )

static

Returns the maximum value for range in (integer) milliamps, or the string "Auto".

If range is not known valid value, then an null QVariant is returned.

Here is the call graph for this function:

◆ maxValue() [2/3]

QVariant MultimeterService::maxValue ( const ResistanceRange & range )

static

Returns the maximum value for range in (integer) ohms, or the string "Auto".

If range is not known valid value, then an null QVariant is returned.

Here is the call graph for this function:

◆ maxValue() [3/3]

QVariant MultimeterService::maxValue ( const VoltageRange & range )

static

Returns the maximum value for range in (integer) millivolts, or the string "Auto".

If range is not known valid value, then an null QVariant is returned.

Here is the call graph for this function:

◆ minValue() [1/3]

QVariant MultimeterService::minValue ( const CurrentRange & range )

static

Returns the minimum value for range in (integer) milliamps, or the string "Auto".

If range is not known valid value, then an null QVariant is returned.

Note, this is an absolute minimum. That is, the true range for DC measurements is from -maxValue(range) to +maxValue(range). In this sense, minValue(range) indicates the magnitude (ignore signs) that can be measured accurately for the given range. As AC current can never be negative, this is relevant for DC current only.

Here is the call graph for this function:

◆ minValue() [2/3]

QVariant MultimeterService::minValue ( const ResistanceRange & range )

static

Returns the minimum value for range in (integer) ohms, or the string "Auto".

If range is not known valid value, then an null QVariant is returned.

Here is the call graph for this function:

◆ minValue() [3/3]

QVariant MultimeterService::minValue ( const VoltageRange & range )

static

Returns the minimum value for range in (integer) millivolts, or the string "Auto".

If range is not known valid value, then an null QVariant is returned.

Note, this is an absolute minimum. That is, the true range for DC measurements is from -maxValue(range) to +maxValue(range). In this sense, minValue(range) indicates the magnitude (ignore signs) that can be measured accurately for the given range. As AC voltage can never be negative, this is relevant for DC voltage only.

Here is the call graph for this function:

◆ readCharacteristics()

bool MultimeterService::readCharacteristics ( )

overridevirtual

Read all characteristics.

This convenience function will queue refresh requests of all characteristics supported by this service.

Relevant *Service::*Read signals will be emitted by derived class objects as each characteristic is successfully read.

Implements AbstractPokitService.

Here is the call graph for this function:

◆ reading()

MultimeterService::Reading MultimeterService::reading ( ) const

Returns the most recent value of the Multimeter service's Reading characteristic.

The returned value, if any, is from the underlying Bluetooth stack's cache. If no such value is currently available (ie the serviceDetailsDiscovered signal has not been emitted yet), then the returned MultimeterService::Reading::value member will be a quiet NaN, which can be checked like:

const MultimeterService::Reading reading = multimeterService->reading();
if (qIsNaN(reading.value)) {
    // Handle failure.
}

Here is the call graph for this function:

◆ readingRead

MultimeterService::readingRead ( const MultimeterService::Reading & reading )

signal

This signal is emitted when the Reading characteristic has been read successfully.

See also: readReadingCharacteristic

◆ readReadingCharacteristic()

bool MultimeterService::readReadingCharacteristic ( )

Read the Multimeter service's Reading characteristic.

Returns true is the read request is succesfully queued, false otherwise (ie if the underlying controller it not yet connected to the Pokit device, or the device's services have not yet been discovered).

Emits readingRead() if/when the characteristic has been read successfully.

Here is the caller graph for this function:

◆ setSettings()

bool MultimeterService::setSettings ( const Settings & settings )

Configures the Pokit device's multimeter mode.

Returns true if the write request was successfully queued, false otherwise.

Emits settingsWritten() if/when the settings have been writtem successfully.

Here is the call graph for this function:

◆ settingsWritten

MultimeterService::settingsWritten ( )

signal

This signal is emitted when the Settings characteristic has been written successfully.

See also: setSettings

The documentation for this class was generated from the following files:

Classes

Public Types

Signals

Public Member Functions

Static Public Member Functions

Static Public Attributes

Friends

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ CurrentRange

◆ MeterStatus

◆ Mode

◆ ResistanceRange

◆ VoltageRange

Member Function Documentation

◆ disableReadingNotifications()

◆ enableReadingNotifications()

◆ maxValue() [1/3]

◆ maxValue() [2/3]

◆ maxValue() [3/3]

◆ minValue() [1/3]

◆ minValue() [2/3]

◆ minValue() [3/3]

◆ readCharacteristics()

◆ reading()

◆ readingRead

◆ readReadingCharacteristic()

◆ setSettings()

◆ settingsWritten