DirectConnectClient Class

Member Function Documentation

DirectConnectClient::DirectConnectClient(const QtAws::Core::AwsRegion::Region region = QtAws::Core::AwsRegion::InvalidRegion, QtAws::Core::AwsAbstractCredentials *credentials = NULL, QNetworkAccessManager * const manager = NULL, QObject * const parent = 0)

Constructs a DirectConnectClient object.

The new client object will region, credentials, and manager for network operations.

The new object will be owned by parent, if set.

DirectConnectClient::DirectConnectClient(const QUrl &endpoint, QtAws::Core::AwsAbstractCredentials *credentials = NULL, QNetworkAccessManager * const manager = NULL, QObject * const parent = 0)

This function overloads DirectConnectClient().

This overload allows the caller to specify the specific endpoint to send requests to. Typically, it is easier to use the alternative constructor, which allows the caller to specify an AWS region instead, in which case this client will determine the correct endpoint for the given region automatically (via AwsEndpoint::getEndpoint).

See also QtAws::Core::AwsEndpoint::getEndpoint.

[slot] AllocateConnectionOnInterconnectResponse *DirectConnectClient::allocateConnectionOnInterconnect(const AllocateConnectionOnInterconnectRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an AllocateConnectionOnInterconnectResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deprecated in favor of

<a>AllocateHostedConnection</a>>

Creates a hosted connection on an

interconnect>

Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given

interconnect> <note>

This is intended for use by AWS Direct Connect partners

[slot] AllocateHostedConnectionResponse *DirectConnectClient::allocateHostedConnection(const AllocateHostedConnectionRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an AllocateHostedConnectionResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a hosted connection on an interconnect or a link aggregation group

(LAG)>

Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect or

LAG> <note>

This is intended for use by AWS Direct Connect partners

[slot] AllocatePrivateVirtualInterfaceResponse *DirectConnectClient::allocatePrivateVirtualInterface(const AllocatePrivateVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an AllocatePrivateVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Provisions a private virtual interface to be owned by another AWS

customer>

Virtual interfaces created using this action must be confirmed by the virtual interface owner by using the <a>ConfirmPrivateVirtualInterface</a> action. Until then, the virtual interface will be in 'Confirming' state, and will not be available for handling

[slot] AllocatePublicVirtualInterfaceResponse *DirectConnectClient::allocatePublicVirtualInterface(const AllocatePublicVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an AllocatePublicVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Provisions a public virtual interface to be owned by a different

customer>

The owner of a connection calls this function to provision a public virtual interface which will be owned by another AWS

customer>

Virtual interfaces created using this function must be confirmed by the virtual interface owner by calling ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface will be in 'Confirming' state, and will not be available for handling

traffic>

When creating an IPv6 public virtual interface (addressFamily is 'ipv6'), the customer and amazon address fields should be left blank to use auto-assigned IPv6 space. Custom IPv6 Addresses are currently not

[slot] AssociateConnectionWithLagResponse *DirectConnectClient::associateConnectionWithLag(const AssociateConnectionWithLagRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an AssociateConnectionWithLagResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to AWS will be interrupted). The connection must be hosted on the same AWS Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can reassociate a connection that's currently associated with a different LAG; however, if removing the connection will cause the original LAG to fall below its setting for minimum number of operational connections, the request

fails>

Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original

LAG>

For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original

[slot] AssociateHostedConnectionResponse *DirectConnectClient::associateHostedConnection(const AssociateHostedConnectionRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an AssociateHostedConnectionResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to AWS as it is being

migrated> <note>

This is intended for use by AWS Direct Connect partners

[slot] AssociateVirtualInterfaceResponse *DirectConnectClient::associateVirtualInterface(const AssociateVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an AssociateVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to AWS is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.

</p

Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using

<a>AssociateHostedConnection</a>>

In order to reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG to which the virtual interface will be newly

[slot] ConfirmConnectionResponse *DirectConnectClient::confirmConnection(const ConfirmConnectionRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an ConfirmConnectionResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Confirm the creation of a hosted connection on an

interconnect>

Upon creation, the hosted connection is initially in the 'Ordering' state, and will remain in this state until the owner calls ConfirmConnection to confirm creation of the hosted

[slot] ConfirmPrivateVirtualInterfaceResponse *DirectConnectClient::confirmPrivateVirtualInterface(const ConfirmPrivateVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an ConfirmPrivateVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Accept ownership of a private virtual interface created by another

customer>

After the virtual interface owner calls this function, the virtual interface will be created and attached to the given virtual private gateway or direct connect gateway, and will be available for handling

[slot] ConfirmPublicVirtualInterfaceResponse *DirectConnectClient::confirmPublicVirtualInterface(const ConfirmPublicVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an ConfirmPublicVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Accept ownership of a public virtual interface created by another

customer>

After the virtual interface owner calls this function, the specified virtual interface will be created and made available for handling

[slot] CreateBGPPeerResponse *DirectConnectClient::createBGPPeer(const CreateBGPPeerRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreateBGPPeerResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a new BGP peer on a specified virtual interface. The BGP peer cannot be in the same address family (IPv4/IPv6) of an existing BGP peer on the virtual

interface>

You must create a BGP peer for the corresponding address family in order to access AWS resources that also use that address

family>

When creating a IPv6 BGP peer, the Amazon address and customer address fields must be left blank. IPv6 addresses are automatically assigned from Amazon's pool of IPv6 addresses; you cannot specify custom IPv6

addresses>

For a public virtual interface, the Autonomous System Number (ASN) must be private or already whitelisted for the virtual

[slot] CreateConnectionResponse *DirectConnectClient::createConnection(const CreateConnectionRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreateConnectionResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a new connection between the customer network and a specific AWS Direct Connect

location>

A connection links your internal network to an AWS Direct Connect location over a standard 1 gigabit or 10 gigabit Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. An AWS Direct Connect location provides access to Amazon Web Services in the region it is associated with. You can establish connections with AWS Direct Connect locations in multiple regions, but a connection in one region does not provide connectivity to other

regions>

To find the locations for your region, use

<a>DescribeLocations</a>>

You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection will be

[slot] CreateDirectConnectGatewayResponse *DirectConnectClient::createDirectConnectGateway(const CreateDirectConnectGatewayRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreateDirectConnectGatewayResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a new direct connect gateway. A direct connect gateway is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. direct connect gateways are global and visible in any AWS region after they are created. The virtual interfaces and virtual private gateways that are connected through a direct connect gateway can be in different regions. This enables you to connect to a VPC in any region, regardless of the region in which the virtual interfaces are located, and pass traffic between

[slot] CreateDirectConnectGatewayAssociationResponse *DirectConnectClient::createDirectConnectGatewayAssociation(const CreateDirectConnectGatewayAssociationRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreateDirectConnectGatewayAssociationResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates an association between a direct connect gateway and a virtual private gateway (VGW). The VGW must be attached to a VPC and must not be associated with another direct connect

[slot] CreateInterconnectResponse *DirectConnectClient::createInterconnect(const CreateInterconnectRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreateInterconnectResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a new interconnect between a AWS Direct Connect partner's network and a specific AWS Direct Connect

location>

An interconnect is a connection which is capable of hosting other connections. The AWS Direct Connect partner can use an interconnect to provide sub-1Gbps AWS Direct Connect service to tier 2 customers who do not have their own connections. Like a standard connection, an interconnect links the AWS Direct Connect partner's network to an AWS Direct Connect location over a standard 1 Gbps or 10 Gbps Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an AWS Direct Connect

router>

You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect will be

created>

For each end customer, the AWS Direct Connect partner provisions a connection on their interconnect by calling AllocateConnectionOnInterconnect. The end customer can then connect to AWS resources by creating a virtual interface on their connection, using the VLAN assigned to them by the AWS Direct Connect

partner> <note>

This is intended for use by AWS Direct Connect partners

[slot] CreateLagResponse *DirectConnectClient::createLag(const CreateLagRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreateLagResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a new link aggregation group (LAG) with the specified number of bundled physical connections between the customer network and a specific AWS Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple 1 gigabit or 10 gigabit interfaces, allowing you to treat them as a single

interface>

All connections in a LAG must use the same bandwidth (for example, 10 Gbps), and must terminate at the same AWS Direct Connect

endpoint>

You can have up to 10 connections per LAG. Regardless of this limit, if you request more connections for the LAG than AWS Direct Connect can allocate on a single endpoint, no LAG is

created>

You can specify an existing physical connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical connection or hosted connections, and re-establishes them as a member of the LAG. The LAG will be created on the same AWS Direct Connect endpoint to which the connection terminates. Any virtual interfaces associated with the connection are automatically disassociated and re-associated with the LAG. The connection ID does not

change>

If the AWS account used to create a LAG is a registered AWS Direct Connect partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly

[slot] CreatePrivateVirtualInterfaceResponse *DirectConnectClient::createPrivateVirtualInterface(const CreatePrivateVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreatePrivateVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a new private virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A private virtual interface supports sending traffic to a single virtual private cloud

[slot] CreatePublicVirtualInterfaceResponse *DirectConnectClient::createPublicVirtualInterface(const CreatePublicVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an CreatePublicVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Creates a new public virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A public virtual interface supports sending traffic to public services of AWS such as Amazon Simple Storage Service (Amazon

S3)>

When creating an IPv6 public virtual interface (addressFamily is 'ipv6'), the customer and amazon address fields should be left blank to use auto-assigned IPv6 space. Custom IPv6 Addresses are currently not

[slot] DeleteBGPPeerResponse *DirectConnectClient::deleteBGPPeer(const DeleteBGPPeerRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DeleteBGPPeerResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deletes a BGP peer on the specified virtual interface that matches the specified customer address and ASN. You cannot delete the last BGP peer from a virtual

[slot] DeleteConnectionResponse *DirectConnectClient::deleteConnection(const DeleteConnectionRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DeleteConnectionResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deletes the

connection>

Deleting a connection only stops the AWS Direct Connect port hour and data transfer charges. You need to cancel separately with the providers any services or charges for cross-connects or network circuits that connect you to the AWS Direct Connect

[slot] DeleteDirectConnectGatewayResponse *DirectConnectClient::deleteDirectConnectGateway(const DeleteDirectConnectGatewayRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DeleteDirectConnectGatewayResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deletes a direct connect gateway. You must first delete all virtual interfaces that are attached to the direct connect gateway and disassociate all virtual private gateways that are associated with the direct connect

[slot] DeleteDirectConnectGatewayAssociationResponse *DirectConnectClient::deleteDirectConnectGatewayAssociation(const DeleteDirectConnectGatewayAssociationRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DeleteDirectConnectGatewayAssociationResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deletes the association between a direct connect gateway and a virtual private

[slot] DeleteInterconnectResponse *DirectConnectClient::deleteInterconnect(const DeleteInterconnectRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DeleteInterconnectResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deletes the specified

interconnect> <note>

This is intended for use by AWS Direct Connect partners

[slot] DeleteLagResponse *DirectConnectClient::deleteLag(const DeleteLagRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DeleteLagResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deletes a link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted

[slot] DeleteVirtualInterfaceResponse *DirectConnectClient::deleteVirtualInterface(const DeleteVirtualInterfaceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DeleteVirtualInterfaceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deletes a virtual

[slot] DescribeConnectionLoaResponse *DirectConnectClient::describeConnectionLoa(const DescribeConnectionLoaRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeConnectionLoaResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deprecated in favor of

<a>DescribeLoa</a>>

Returns the LOA-CFA for a

Connection>

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that your APN partner or service provider uses when establishing your cross connect to AWS at the colocation facility. For more information, see <a href="http://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html">Requesting Cross Connects at AWS Direct Connect Locations</a> in the AWS Direct Connect user

[slot] DescribeConnectionsResponse *DirectConnectClient::describeConnections(const DescribeConnectionsRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeConnectionsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Displays all connections in this

region>

If a connection ID is provided, the call returns only that particular

[slot] DescribeConnectionsOnInterconnectResponse *DirectConnectClient::describeConnectionsOnInterconnect(const DescribeConnectionsOnInterconnectRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeConnectionsOnInterconnectResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deprecated in favor of

<a>DescribeHostedConnections</a>>

Returns a list of connections that have been provisioned on the given

interconnect> <note>

This is intended for use by AWS Direct Connect partners

[slot] DescribeDirectConnectGatewayAssociationsResponse *DirectConnectClient::describeDirectConnectGatewayAssociations(const DescribeDirectConnectGatewayAssociationsRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeDirectConnectGatewayAssociationsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns a list of all direct connect gateway and virtual private gateway (VGW) associations. Either a direct connect gateway ID or a VGW ID must be provided in the request. If a direct connect gateway ID is provided, the response returns all VGWs associated with the direct connect gateway. If a VGW ID is provided, the response returns all direct connect gateways associated with the VGW. If both are provided, the response only returns the association that matches both the direct connect gateway and the

[slot] DescribeDirectConnectGatewayAttachmentsResponse *DirectConnectClient::describeDirectConnectGatewayAttachments(const DescribeDirectConnectGatewayAttachmentsRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeDirectConnectGatewayAttachmentsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns a list of all direct connect gateway and virtual interface (VIF) attachments. Either a direct connect gateway ID or a VIF ID must be provided in the request. If a direct connect gateway ID is provided, the response returns all VIFs attached to the direct connect gateway. If a VIF ID is provided, the response returns all direct connect gateways attached to the VIF. If both are provided, the response only returns the attachment that matches both the direct connect gateway and the

[slot] DescribeDirectConnectGatewaysResponse *DirectConnectClient::describeDirectConnectGateways(const DescribeDirectConnectGatewaysRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeDirectConnectGatewaysResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns a list of direct connect gateways in your account. Deleted direct connect gateways are not returned. You can provide a direct connect gateway ID in the request to return information about the specific direct connect gateway only. Otherwise, if a direct connect gateway ID is not provided, information about all of your direct connect gateways is returned.

[slot] DescribeHostedConnectionsResponse *DirectConnectClient::describeHostedConnections(const DescribeHostedConnectionsRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeHostedConnectionsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns a list of hosted connections that have been provisioned on the given interconnect or link aggregation group

(LAG)> <note>

This is intended for use by AWS Direct Connect partners

[slot] DescribeInterconnectLoaResponse *DirectConnectClient::describeInterconnectLoa(const DescribeInterconnectLoaRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeInterconnectLoaResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Deprecated in favor of

<a>DescribeLoa</a>>

Returns the LOA-CFA for an

Interconnect>

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see <a href="http://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html">Requesting Cross Connects at AWS Direct Connect Locations</a> in the AWS Direct Connect user

[slot] DescribeInterconnectsResponse *DirectConnectClient::describeInterconnects(const DescribeInterconnectsRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeInterconnectsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns a list of interconnects owned by the AWS

account>

If an interconnect ID is provided, it will only return this particular

[slot] DescribeLagsResponse *DirectConnectClient::describeLags(const DescribeLagsRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeLagsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Describes the link aggregation groups (LAGs) in your account.

</p

If a LAG ID is provided, only information about the specified LAG is

[slot] DescribeLoaResponse *DirectConnectClient::describeLoa(const DescribeLoaRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeLoaResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns the LOA-CFA for a connection, interconnect, or link aggregation group

(LAG)>

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see <a href="http://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html">Requesting Cross Connects at AWS Direct Connect Locations</a> in the AWS Direct Connect user

[slot] DescribeLocationsResponse *DirectConnectClient::describeLocations()

Sends a DescribeLocations request to the DirectConnectClient service, and returns a pointer to an DescribeLocationsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns the list of AWS Direct Connect locations in the current AWS region. These are the locations that may be selected when calling <a>CreateConnection</a> or

[slot] DescribeTagsResponse *DirectConnectClient::describeTags(const DescribeTagsRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeTagsResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Describes the tags associated with the specified Direct Connect

[slot] DescribeVirtualGatewaysResponse *DirectConnectClient::describeVirtualGateways()

Sends a DescribeVirtualGateways request to the DirectConnectClient service, and returns a pointer to an DescribeVirtualGatewaysResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Returns a list of virtual private gateways owned by the AWS

account>

You can create one or more AWS Direct Connect private virtual interfaces linking to a virtual private gateway. A virtual private gateway can be managed via Amazon Virtual Private Cloud (VPC) console or the <a href="http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-CreateVpnGateway.html">EC2 CreateVpnGateway</a>

[slot] DescribeVirtualInterfacesResponse *DirectConnectClient::describeVirtualInterfaces(const DescribeVirtualInterfacesRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DescribeVirtualInterfacesResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Displays all virtual interfaces for an AWS account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is

returned>

A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the

[slot] DisassociateConnectionFromLagResponse *DirectConnectClient::disassociateConnectionFromLag(const DisassociateConnectionFromLagRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an DisassociateConnectionFromLagResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the <a>DeleteConnection</a> request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an AWS Direct Connect partner is automatically converted to an

interconnect>

If disassociating the connection will cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.

[slot] TagResourceResponse *DirectConnectClient::tagResource(const TagResourceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an TagResourceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Adds the specified tags to the specified Direct Connect resource. Each Direct Connect resource can have a maximum of 50

tags>

Each tag consists of a key and an optional value. If a tag with the same key is already associated with the Direct Connect resource, this action updates its

[slot] UntagResourceResponse *DirectConnectClient::untagResource(const UntagResourceRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an UntagResourceResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Removes one or more tags from the specified Direct Connect

[slot] UpdateLagResponse *DirectConnectClient::updateLag(const UpdateLagRequest &request)

Sends request to the DirectConnectClient service, and returns a pointer to an UpdateLagResponse object to track the result.

Note: The caller is to take responsbility for the resulting pointer.

Updates the attributes of a link aggregation group (LAG).

</p

You can update the following attributes:

</p <ul> <li>

The name of the

LAG> </li> <li>

The value for the minimum number of connections that must be operational for the LAG itself to be operational.

</p </li> </ul>

When you create a LAG, the default value for the minimum number of operational connections is zero (0). If you update this value, and the number of operational connections falls below the specified value, the LAG will automatically go down to avoid overutilization of the remaining connections. Adjusting this value should be done with care as it could force the LAG down if the value is set higher than the current number of operational